Check out the best new tools Milwaukee has to offer

July 8, 2024

Check out the best new tools Milwaukee has to offer

Milwaukee is one of the best-selling tool brands on the market, and for good reason. Offering a wide selection of tools for every industry, Milwaukee prides itself on durability, versatility, quality, and performance. From the Milwaukee M18 FUEL™ 6-1/2 Inch Circular Saw and Milwaukee M18 Compact 1-Ton Chain Hoist with One Key to the M18 FUEL™ 9-Gallon Dust Extractor and Milwaukee M18 FUEL™ Duplex Nailer, their latest releases are just what you need to complete your job successfully.

Whether you’re a large-scale commercial contractor, a residential builder, or a DIY pro, Milwaukee Tools has what you need to get the job done. Here’s a look at some of their latest releases.

M18 FUEL™ 6-1/2 Inch Circular Saw

Designed with the Pros in mind, the new Milwaukee M18 FUEL™ 6-1/2 inch circular saw (2833) is built tough, no matter the application. Combining three different technologies—POWERSTATE™ Brushless Motors, extended run-time REDLITHIUM™ XC 4.0 Battery Packs, and REDLINK PLUS™ Intelligence advanced electronics—the cordless circular emits just as much power as corded competitors. The brushless motor delivers a top speed of 6,000 RPMs with a maximum cutting depth of 2-1/4 inches at 90 degrees. Its versatile design enables you to perform rip, cross, miter, and bevel cuts, and the positive bevel detents and depth detent make adjustments easy,

Product highlights

POWERSTATE™ Brushless Motor with 3X longer tool life
REDLINK PLUS™ Intelligence: The most advanced electronic system on the market maximizes performance
REDLITHIUM™ XC 4.0 Battery Pack offers up to 4X more runtime, 20% more power, and up to 2X more recharges than other batteries
Includes canvas carry bag, M18™ and M12™ Multi-Voltage Charger, two 4.0 Ah battery packs, framing blade, and blade wrench
LED Light
Speed: 5,000 RPM
Arbor size: 5/8″
Blade guard: Magnesium
Shoe: Magnesium
Maximum bevel capacity: 50 degrees
5-year tool warranty

M12 FUEL™ Gen II 5-3/8 Inch Circular Saw

The Gen II M12 FUEL™ 5 3/8-inch circular saw isn’t just for DIYers. With cutting capacity to handle 2x lumber and sheet goods, it delivers top-tier performance with a more compact size and lighter weight. It’s an excellent option for tradespeople who don’t need higher capacity or extreme runtime but don’t want to compromise power and performance. Its brushless motor tops out blade speed at 3,850 RPMs, enabling it to power through tough cuts and minimize bog downs. And as one of this class’s most compact and lightweight models, it’s ultra-portable and convenient in tight spaces.

Product highlights

POWERSTATE brushless motor delivers maximum power and provides up to 2X longer motor life
REDLINK PLUS intelligence provides optimized performance and overload protection
REDLITHIUM™ XC 4.0 Battery Pack offers up to 4X more runtime, 20% more power, and up to 2X more recharges than other batteries
1-5/8 in. cut capacity
LED light for better cutline visibility in low-light conditions
Compatible with all M12 batteries and chargers
Includes one M12 FUEL™ 5-3/8 in. circular saw (tool only) (2530-20)

M12 Brushless 1 1/4 – 2-inch Copper Tubing Cutter

The Milwaukee M12 brushless 1 1/4 – 2 inch copper tubing cutter offers improved productivity, cut quality, and capacity, delivering quick, clean cuts to type K, L, and M copper pipes 1-1/4″ to 2″ (nominal), with diameters from 1-3/8″ to 2-1/8″. The automatic adjustment feature means the cutter will automatically adjust to the size of the pipe. The new M12 tubing cutter is designed to eliminate the need for manual cutters and reduce user fatigue, and its rotating head only needs 1.7 inches of clearance. Its inline design also provides improved balance and control during one-handed operation.

Product highlights

Specific for type K, L, and M copper pipes
1-1/4″ – 2″ nominal cutting capacity
1-3/8″ – 2-1/8″ outer diameter capacity
Automatically adjust the diameter to cut from 3/8″ – 1″ copper
Inline design for less fatigue in confined spaces
LED work light
Unmatched cutting speed
View window for line of cut visibility
Powerful 500-RPM motor cuts up to 10X faster than conventional cutters
Electronic Overload Protection along with uni-body construction for increased durability
Compatible with all M12 batteries and chargers

M18 Compact 1-Ton Chain Hoist with One Key™

The M18™ Compact 1-Ton Chain Hoist with One Key™ brings the latest technology to the material handling industry. Designed to make installs easier, reduce downtime, and improve mobility, the chain hoist is among the biggest assets for lifts. An impressive 2,200-pound lift capacity, wireless design, and compact profile eliminate the time needed to set up extension cords to power hoists onsite. The Kitted wireless remote delivers improved control, and including a PACKOUT™ Rolling Cart offers unmatched mobility between job sites.

Product highlights

1 metric ton (2,204lbs) lifting capacity with 20ft chain
One-person carry (46lbs)
Wireless remote with up to 60ft range
Inverted and standard installs
Enhanced control through variable speed and fine adjustment
Hoist inspection interval and record storage via ONE-KEY™
5-year tool warranty and 3-year battery warranty

Roll-On 7200W/3600W 2.5kWh Power Supply

The Milwaukee Roll-On 7,200W/3,600W 2.5kWh power supply delivers instant gas-equivalent power for the toughest jobs. It uses a REDLITHIUM™ Integrated 2.5kWh Battery, providing high power and runtime during sustained high-demand applications. ROLL-ON™ has two (2) 20A duplex breaker outlets, one USB-A port, and one USB-C port for instant power for corded tools, chargers, and other electronics. ROLL-ON™ can be used indoors and outdoors (temporary use) with zero emissions, quiet operation, and IP54 rating to withstand job site conditions. Add the ROLL-ON™ 7200W/3600W 2.5kWh Power Supply Cover (48-11-3300) to protect your machine against dust and debris in storage.

Product highlights

7200W of starting power and 3600W of running power
REDLITHIUM Integrated 2.5kWh Battery provides high power and runtime
Instant setup eliminates temporary power and gas hassles
Zero emissions, quiet operation, and IP54-rated protection
Charges in 3 hours to 100% and in under 35 minutes to 25%
Pure sine wave inverter protects sensitive electronics
Features pass-through power for the ability to charge and discharge simultaneously
Fully compatible with the PACKOUT Modular Storage System
9.5″ All-Terrain Wheels
Integrated ONE-KEY™ for tracking, management, and adjustable charging rate to maximize outlet usage onsite

M18 Brushless Single Acting 60in3 10,000psi Hydraulic Pump

The Milwaukee M18 Brushless Single Acting 60in3 10,000psi Hydraulic Pump saves time and effort by eliminating the need for manual pumps on the job site. The pump is 2.5X faster than hand pumps and requires 95% less muscle effort to deliver increased productivity, faster applications, and less fatigue. A manual valve allows precise control over return flow, while a bladder window will enable you to gauge fluid levels quickly. It’s fully compatible with all existing 10,000psi single-acting rated hydraulic hoses and cylinders. And at just 12.6 lbs, this compact pump is highly portable and allows easy transport to every application.

Product highlights

Compatible with all 10,000 psi rated single-acting hydraulic hoses, cylinders, and tools
60in3 of usable oil allows you to fully extend a wide variety of small cylinders and tools to full stroke
Manual valve enables better control over return flow
Bladder window to quickly gauge fluid levels
Trigger Lock Out prevents unwanted tool activation in transport, set up, and tear down
Integrated D-Rings to easily tie-off with a lanyard at heights
Compact and lightweight design at only 12.6 lbs
Brushless motor provides improved durability
Compatible with all M18™ batteries and chargers

MX FUEL™ 1 HP 2″ Submersible Pump

Standing water on a job site can be problematic, especially in the colder months. The Milwaukee MX FUEL™ 1 HP 2″ Submersible Pump provides portability and efficiency for removing water without needing a generator in confined spaces. It uses auto-sensing technology to automatically sense water levels and respond without manual adjustment to improve efficiency.

Using the MX FUEL™ XC6.0 battery, this pump delivers up to 20 minutes of continuous runtime and relocates up to 2,000 gallons per charge. The Portable Pump Console is ONE-KEY Compatible and compatible with all MX FUEL™ batteries and MX FUEL™ portable pump consoles.

The MX FUEL™ 1 HP 2″ Submersible Pump is set to hit shelves in Q3 of 2024.

Product highlights

No generator required
Auto-sending enables greater efficiency and runtime
20 minutes of runtime and clears 2,000 gallons per charge
Three performance modes (high, auto, and low)
POWERSTATE™ Brushless Motor provides more power, more run-time, and longer life
Fully compatible with the MX FUEL™ Equipment System
2-year equipment warranty and 2-year battery warranty

MX Fuel™ 70kg Rammer

A full-sized plate compactor can be tricky to maneuver in tight spaces, even for a pro. The Milwaukee MX FUEL™ 70kg Rammer is compact, easily fits into confined spaces, and is easy to use. It features a centralized control panel for easy adjustments and better control and stability. The POWERSTATE™ Brushless Motor delivers greater power for maximum productivity without sacrificing compaction performance. And with no gas and a push-button start, there’s no headache to get it started. Plus, zero emissions mean it’s safe for indoor and outdoor use. When paired with an MX FUEL™ Forged HD 12.0Ah battery, it offers 25 minutes of continuous runtime or approximately 1/4 mile of compaction.

The MILWAUKEE® MX FUEL™ 70kg Rammer is fully compatible with ONE-KEY™ and our MX FUEL™ Equipment System.

The MX FUEL™ 70kg Rammer is set to hit shelves in Q2 of 2024.

Product highlights

25 min of runtime or more than 1/4 mile of compaction per charge
Centralized user interface for easy adjustments and greater control and stability
Push button start/stop
Stability and tip detection for optimal safety
ONE-KEY™ compatible
65-minute charge time with the MX FUEL™ REDLITHIUM™ FORGE™ HD12.0 on the MX FUEL™ Super Charger
Fully Compatible with the MX FUEL™ Equipment System
2-year equipment warranty and 2-year battery warranty

MX FUEL™ Portable Battery Extension

Never worry about running out of battery on the job with the all-new MX FUEL™ Portable Battery Extension—operate your MX FUEL™ Equipment and take the weight of the MX FUEL™ battery pack. It delivers a lighter tool weight and less fatigue on handheld equipment without compromising performance. Fully compatible with all MX FUEL™ batteries, the MX FUEL™ Portable Battery Extension allows you to benefit from maximum run-time by leveraging Mialwukee’s most capable battery packs. The 8′ tether adapter offers peak flexibility to operate hand-held equipment from the ground, a ladder, lift, or scaffolding. And the backpack harness with adjustable straps and carrying handle offers easy transport between sites.

The MX FUEL™ Portable Battery Extension is set to hit shelves in Q2 of 2024.

Product highlights

Lighter tool weight for reduced fatigue without compromising performance
Compatible with all MX FUEL™ batteries
Up to 45% less MX FUEL™ Equipment weight
8’ ether Adapter fits all MX FUEL™ Equipment
Easily remove Backpack Harness for stationary use
2-year equipment warranty

M18 FUEL™ Duplex Nailer

The M18 FUEL™ Duplex Nailer takes concrete formwork to new levels by boosting productivity and optimizing ergonomics. It leverages Milwaukee’s nitrogen air spring technology, POWERSTATE™ Brushless motor, and REDLINK™ Intelligence to deliver maximum performance. Capable of firing rates of up to 4 nails per second, the M18 FUEL™ Duplex Nailer can increase productivity by up to 7X and reduce user muscle strain, effort, and fatigue.

The all-new nailer has user-driven features and a cordless design for greater maneuverability. It’s also compatible with Milwaukee’s Collated Duplex Nails in two sizes: 8D (2 ¼” drivable length) and 16D (3” drivable length). And when paired with our M18™ REDLITHIUM™ 5.0AH Battery pack, users can fire up to 800 nails per charge.

The M18 FUEL™ Duplex Nailer is set to hit shelves in Q3 of 2024.

Product highlights

Only compatible with Milwaukee Collated Duplex Nails (MDP8D-2000, MDP16D-2000)
Tool-free jam-clearing latch and depth-adjustment
Rapid firing speed at 4 nails per second
Belt and rafter hook
Nail placement indicator
LED work light
Dry fire lockout
REDLITHIUM battery technology delivers more work per charge and more work over pack life
POWERSTATE Brushless Motor delivers longer life and higher performance
Ergonomic handle for use with thick work gloves

MX FUEL™ 14″ Cut-Off Saw w/ RAPIDSTOP™

The MX FUEL™ 14 in. Cut-Off Saw w/ RAPID STOP™ delivers 14” gas performance with zero emissions and no gas headaches. The POWERSTATE™ Brushless Motor enables users to cut tough materials like rebar, concrete, and ductile iron with precision and ease. The push-button start delivers instant power for faster cutting, and the no-gas engine means less noise and vibration and safer use for indoor and outdoor applications.

Featuring RAPID STOP™ Blade Break & Kickback Control, the MX FUEL™ 14 in. Cut-Off Saw enhances safety by stopping the blade in three seconds. REDLINK PLUS™ Intelligence ensures optimal tool performance and provides overload protection. It also contains an electric onboard water connection that releases water when the trigger is released, helping to reduce onsite mess.